Products | Stainless Steel | Shape and Edge Conditions
| PARAMETERS | PRECISION PRODUCTS | 2B PRODUCTS | REMARKS | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 2 H | 2 R | BA | 2 B | 2 D | 2 B | No 3/ No 4 | ||||
| Crown | Within  thickness tolerance |
Within thickness tolerance |
click for images & definotion |
|||||||
| Camber | max. 0.75mm/1m length | max. 4mm/2m length or 1mm/1m | click for images & definotion |
|||||||
| Flatness | Edge waves | H/L  0.015( 1.5%) |
H/L 0.030 ( 3.0%) |
H/L 0.015 ( 1.5%) |
click for images & definotion |
|||||
| Center waves | Strips (coils) | H=max.1.5 mm | H=max.4 mm | click for images & definotion |
||||||
| Sheets | Not applicable | Not applicable | H=max. 4mm | |||||||
| Curl | Not applicable | click for images & definotion |
||||||||
| Cross bow | click for images & definotion |
|||||||||
| Coil set | ID*=300 mm | click for images & definotion |
||||||||
| ID*=400 mm | ||||||||||
| ID*=500/508 mm | ||||||||||
| ID*=610 mm | ||||||||||
| Telescopicity | Max. 2.5 mm (slit edge coils) | Max. 10 mm (slit edge coils) | click for images & definotion |
|||||||
| Max. 5.0 mm (mill edge coils) | Max. 20 mm (mill edge coils) | |||||||||
| PARAMETERS | PRECISION PRODUCTS | 2B PRODUCTS | REMARKS | ||||||
|---|---|---|---|---|---|---|---|---|---|
| 2 H | 2 R | BA | 2 B | 2 D | 2 B | No 3/ No 4 | |||
| Mill edge | Only for inner diameter 508mm or 610mm |
Not applicable | Width between 1020mm and 1270mm |
click for images & definotion |
|||||
| Slit edge | The burr is maximum 10% from measured thickness |
The burr is maximum 10% from measured thickness |
click for images & definotion |
||||||
| Trimmed edge * |
De-burred | Yes | Not applicable | click for images & definotion |
|||||
| Square | Yes | click for images & definotion |
|||||||
| Round | Yes | click for images & definotion |
|||||||
| Chamfer | Yes | click for images & definotion |
|||||||
