Dimensions and tolerances
Classification
Dimensions and tolerances
PARAMETERS | PRECISION PRODUCTS | STANDARD PRODUCTS | ||||
2H | 2R | BA | 2B | 2D | 2B | |
Thickness range (mm) | 0.05 – 0.8mm (width max 620mm) | 0.3 – 1.5 mm | 0.25 – 1.5 mm | 0.25 – 1.5mm (For thickness under 0.3mm max width is 1020mm) | ||
Tolerances | ||||||
[0.05-0.10) | ±0.002 / ± 0.004 | Not applicable | Not applicable | Not applicable | ||
[0.10-0.15) | ±0.006 / ± 0.010 | |||||
[0.15-0.20) | ± 0.008 / ± 0.012 | |||||
[0.20-0.25) | ± 0.008 / ± 0.012 | |||||
[0.25-0.30) | ± 0.009 / ± 0.015 | ± 0.020 | ± 0.020 | |||
[0.30-0.40) | ± 0.010 / ± 0.015 | ± 0.025 | ± 0.025 | |||
[0.40-0.50) | ± 0.012 / ± 0.018 | ± 0.025 | ± 0.025 | |||
[0.50-0.60) | ± 0.014 / ± 0.020 | ± 0.030 | ± 0.030 | |||
[0.60-0.80] | ± 0.015/ ± 0.018 / ± 0.025 | ± 0.035 | ± 0.035 | |||
[0.80-1.00) | ± 0.025 | ± 0.040 | ± 0.040 | |||
[1.00-1.20) | ± 0.030 | ± 0.045 | ± 0.045 | |||
[1.20-1.50) | ± 0.030 | ± 0.050 | ± 0.050 | |||
[1.50-2.00) | Not applicable | ± 0.055 | ||||
[2.00-2.50) | ± 0.090 | |||||
[2.50-3.00] | ± 0.110 / ± 0.130 | |||||
PARAMETERS | PRECISION PRODUCTS | STANDARD PRODUCTS | ||||
2H | 2R | BA | 2B | 2D | 2B | |
Width range (mm) | [5 – 1250 mm] – (Mill edge 620 and 1270mm in width) | [50 – 1250mm] (Mill edge for 1270mm in width) | ||||
Tolerances | ||||||
[5 – 40] | + 0.10 mm for [0.05 – 0.25) mm thickness | Not applicable | ||||
+ 0.12 mm for [0.25 – 0.50) mm thickness | ||||||
+ 0.15 mm for [0.50 – 0.80] mm thickness | ||||||
(40 – 125] | + 0.12 mm for [0.05 – 0.25) mm thickness | + 0.5 mm | ||||
+ 0.15 mm for [0.25 – 0.50) mm thickness | ||||||
+ 0.17 mm for [0.50 – 0.80] mm thickness | ||||||
+ 0.22 mm for [0.80 – 1.00] mm thickness | ||||||
+ 0.25 mm for [1.00 – 1.50] mm thickness | ||||||
(125 – 250] | + 0.15 mm for [0.05 – 0.25) mm thickness | + 0.5 mm | ||||
+ 0.17 mm for [0.25 – 0.50) mm thickness | ||||||
+ 0.20 mm for [0.50 – 0.80] mm thickness | ||||||
+ 0.25 mm for [0.80 – 1.00] mm thickness | ||||||
+ 0.30 mm for [1.00 – 1.50] mm thickness | ||||||
(250 – 625] | + 0.40 mm for [0.05 – 0.25) mm thickness | + 0.5 mm | ||||
+ 0.40 mm for [0.25 – 0.50) mm thickness | ||||||
+ 0.50 mm for [0.50 – 0.80] mm thickness | ||||||
+ 0.50 mm for [0.80 – 1.00] mm thickness | ||||||
+ 0.60 mm for [1.00 – 1.50] mm thickness | ||||||
[600 – 1000] | + 1.5 mm | + 1.5 mm | ||||
(1000 – 1250] | + 1.5 mm | + 1.5 mm | ||||
PARAMETERS | PRECISION PRODUCTS | STANDARD PRODUCTS | REMARKS | ||||
2H | 2R | BA | 2B | 2D | 2B | ||
Thickness range | 0.1 – 0.8 mm |
Not applicable | |||||
Strip width | 5 – 30 mm | The maximum processing width can be 37mm. Over 30mm in width will be | |||||
Spool width | max. 400 mm | ||||||
PARAMETERS | PRECISION PRODUCTS | STANDARD PRODUCTS | ||||
2H | 2R | BA | 2B | 2D | 2B | |
Thickness range | 0.2 – 0.8 mm | Not applicable | ||||
Strip width | 5 – 50 mm | |||||